Contract no.: 510470

=============================================================================================

 

 

 


























 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

MINAEAST events

IMT Bucharest
Third MINAEAST Workshop
January 26-27, 2006, Grenoble, FRANCE
Registration. Draft agenda (updated 23.01.2006) .
TUB (Technical University of Berlin, Research Centre of Microperipherics Technology)

BUTE (Budapest University of Technology & Economics, Dept. of Electron Devices)

NANO-MAT-PROD Conference, Budapest, Hungary, January 20 - 21, 2005

IET (Institute of Electron Technology, Department of Silicon Microsystem and Nanostructure Technology)

IST Call 4 Info Day eGovernment, January 14, 2005, Warsaw, Poland.
Organised by the "Polish Ministry of Scientific Research and Information Technology;
IPE (Institute of Physical Electronics of Kaunas University of Technology)
Advanced Materials and Technologies International Conference, August 27-31, 2004, Palanga, Lithuania.
Organised by Kaunas University of Technology (KTU).
Materials Engineering 2004, November 12, 2004, Kaunas, Lithuania.
Organised by Kaunas University of Technology.

Investigation of macromolecular structures and biological materials on the nanoscale, February, 20-23,2004, Vilnius, Lithuania. Organised by Kaunas University of Technology.

Information day “FP6. Nanotechnologies and NEST – oportunities in the 2005 year”, December 16, 2004, Kaunas, Lithuania. Organized by Agency for International Science and Technology Development Programmes in Lithuania.

ISSP (Institute of Solid State Physics of the Bulgarian Academy of Sciences, Laboratory of Semiconductor Heterostructures)

Nanophenomena at surfaces- fundamentals of exotic condensed matter properties, 19 - 25 February, 2005, Pamporovo Ski Center – Bulgaria.

3d Intern. Symposium Irradiation Induced Phenomena In Chalcogenide, Oxide And Organic Thin Films, June 15-19, 2004, Tryvna, Bulgaria. Organised by the CENTRAL LABORATORY OF PHOTOPROCESSES "Acad. J. Malinowski".

KTU (Kaunas University of Technology, Ultrasound Institute)
Electronics '2004, May 18-20, 2004, Kaunas, Lithuania.
Organised by Kaunas University of Technology.

Applied Physics, May 12-13, 2004, Kaunas, Lithuania.
Organised by Kaunas University of Technology.

SU (Sabanci University, Faculty of Engineering & Natural Sciences, Microelectronics Engineering Program)

National Conference on Optics, Optoelectronics and Photonics, 10-Dec-2004, Istanbul, Turkey.
Organised by Sabanci University Istanbul.

TUK (Technical University of Kosice, Metallurgical Faculty, Dept. of Materials Science)

Slovak mobilization workshop-conference "Nanoved 2004", 13-14.09.2004, Košice, Slovakia, . Organised by the Slovak Academie of Sciences, Institute of Materials Research, Košice - Technical University of Košice.

Czecho-Slovak workshop: Local mechanical properties - Lokálne mechanické vlastnosti, 01-02.12.2004, Košice, Slovakia, Organised by the Technical University of Košice.

..........................................................................................................

Other events:

PATENT-DfMM and NEXUS MWG Design Modelling Simulation Workshop, 25-26 January 2007, Berlin, Germany (Details...)

The objective of this workshop is to identify needs of the MEMS industry (fabless design houses, manufacturers, etc.) in terms of design methodology and software tools. As an outcome, PATENT aims at a first draft road map identifying key challenges as well as probable developments associated with future design methodologies and tools in the areas of DfT (Test), DfR (Reliability) and DfP (Packaging) strategies for MNT.
MEMS designers from industry and research labs, as well as MEMS software tool providers are welcome to participate. Active participants will receive a copy of the resulting “roadmap documentation”.
The workshop is jointly organised by the NEXUS MWG Design Modelling Simulation and (DMS) PATENT-DfMM NoE.

Contact: Patric Salomon, E-mail: patric.salomon@4m2c.com

Photonics West 2007. 20-25 January 2007, San Jose, USA. (Details...)

Attend Photonics West 2007, North America’s largest Photonics and Biomedical Optics Exhibitions. Get the latest news and updates from your colleagues in the industry and from academia. Learn about new techniques from the leading technologists, engineers, scientists, and applications developers--be a part of the evolution of these vital technologies.

MANUFACTURING in FP7 Conference, 17-19 January 2007, Cardiff University, UK (Details...)

The Manufacturing in FP7 Conference aims to provide indepth information about the manufacturing topics addressed in both Theme 3 (Information and Communication Technologies - ICT) and Theme 4 (Nanosciences, Nanotechnologies, Materials and new Production Technologies - NMP) of the European Union's 7th Framework Programme, FP7 which will run for seven years and will be fully operational as of 1 January 2007.

The Manufacturing in FP7 Conference is organised by I*PROMS and 4M FP6 Networks of Excllence and sponsored by the European Commission and the Manufacturing Engineering Centre (MEC), Cardiff University, UK - Co-ordinator of both I*PROMS and 4M NoEs. The Conference is also supported by the European Manufuture Platform and the MEC-based MicroBridge Project which is funded by the DTI UK and the Welsh Assembly Government (WAG).

The second European Nanotechnology Partnering Day “Co-operation: Nano 07“, 17-18 January 2007, Wiener Neustadt, Austria (Details...)

Nanotechnology already has become a challenging opportunity for a wide range of businesses. The Nanotechnology cooperation event has been organised in order to meet the demand on know-how regarding nanotechnology and nanosciences. All NANO related companies, universities, R&E institutions, inventors are invited to participate. This event will provide an opportunity to increase technological know-how, to find co-operation partners, to learn about NANO activities in Europe as well as to extend personnel networks. Flyer Nano 07.

Who should participate:

- CEO, Heads of R&D, leading employees
- Employees from innovation, production, materials, surfaces departements
- Academic staff from university, university of applied sciences
- Scientific staff from non university R&D facilities

Deadline for registration 31 December 2006.

MINOS Brokerage event associated with the 4M NoE project, 18 December 2006, 14:00 - 18:00, University of Sofia, Bulgaria

Agenda:

  • "FP7: NMP programme with a focus on Micro/Nano Manufacturing (MNM) and especially the new European MANUFUTURE sub-platform on MNM" - Prof. Stefan Dimov, Director of The Manufacturing Engineering Centre, Cardiff University, UK
  • IMT Presentation and discussions about new project proposals - Prof. Dan Dascalu, Director of The National Institute for Research and Development in Microtechnologies, Bucharest, Romania and coordinator of the MINOS EURONET Project.

For details: Prof. Dr. Marin Hristov, e-mail: mhristov@ecad.tu-sofia.bg.

The 2nd Workshop on NanoTechnology Transfer in Europe- NanoTRANSFER 2006, 13 December 2006, Paris, France (Details...)

The Workshop on Nano Technology Transfer is designed to stimulate technology licensing, commercial partnerships and joint technology development.

The participants to the workshop include:

• Researchers
• Start-ups
• Technology Transfer and Licensing Offices
• Established companies interested in nanotechnology
• IP-centered organizations
• Investors and experts from areas supporting tech transfer

The workshop´s format encourages the setting of pre-arranged meetings to discuss potential business opportunities with the speakers.

Smart Materials, Nano- & Micro-Smart Systems. 10-13 December 2007, Adelaide, Australia. (Details...)

Hear the latest about state-of-the-art applications and techniques, as well as issues developing as a result of alternative technologies.

FP7 launch conference, 16-17 November 2006, Warsaw, Poland (Details...)

The conference will present information about the aims, rules of participation, budget and structure of FP7. The event will facilitate working relationships between research and industrial teams interested in creating consortia and preparing projects for FP7.

In addition, the conference will be an opportunity to summarise the participation of Polish teams in the sixth Framework Programme and recognise the most active and successful participants.

The Conference will be held under the honorary patronage of the President of Republic of Poland, Lech Kaczynski.

International conference NANO '06- Nanostructured Materials for Functional, Structural and Bio-applications,  13 - 15 November 2006, Faculty of Mechanical Engineering, Brno University of Technology, Brno, Czech Republic (Details...)

NANO '06 is the fifth in the series of conferences that have been held annually at the Faculty of Mechanical Engineering of Brno UT. It has as its primary aim to provide scope for the dissemination of knowledge obtained in the area of nanostructure materials and nanotechnologies, and the application of this knowledge to industrial practise. The Conference is also expected to serve as an interactive forum for establishing and amplifying personal contacts within the "nano-community frame" and supporting cooperation in national and international research and development programmes.

 The 32nd Annual Conference of the IEEE Industrial Electronics Society- IECON 2006, 7 - 10 November 2006, Paris, France (Details...)

IECON'06 is an international conference on industrial applications of electronics, control, robotics, signal processing, computational and artificial intelligence, sensors and actuators, instrumentation electronics, computer networks, internet and multimedia technologies. The objectives of the conference are to provide high quality research and professional interactions for the advancement of science, technology, and fellowship.
 ISNM 2006 International Symposium on Nanomanufacturing, 1- 3 November 2006, Cambridge, MA, USA (Details...)

The International Symposium on Nanomanufacturing (ISNM) was created to foster interaction between the well-established manufacturing community and the emerging nanotechnology community. Through the ISNM, scholars, engineers and members of the business community address basic research, education, dissemination, implementation and cooperation issues related to the manufacture of products that utilize the characteristics of nano-scale features/components/phenomena. Themes – The main theme for ISNM 2006 will be 3D Nanomanufacturing – realizing products that utilize 3D, nano-scale features/components/assemblies to enable improved functionality.
 4M 2006, International Conference on: Multi-Material Micro Manufacture (4M)
September 20-22 2006, Grenoble, France

Conference Chair: Prof. Wolfgang Menz, Germany
Conference Co-Chair: Dr. Stefan Dimov, Cardiff University, UK
Organized by: 4M Network of Excellence. More information about the 4M Network of Excellence (sponsored by EC) and the 4M Conference is available at: www.4m-net.org
 TNT 2006 "Trends in Nanotechnology", 04-08 September, 2006 Grenoble, France (Details...)
Important Dates:
Abstract Submission (Oral request)- April 24, 2006, Student Grant Request- April 24, 2006, Abstract Submission (Poster request)- August 01 , 2006
 CANEUS 2006 Conference "MNT for Aerospace Applications"
August 27- September 1, 2005, Toulouse, France

International Workshop on Nanostructured Materials, 21-23 June, 2006, Antalya, Turkey
The workshop on Nanostructured Materials is an international workshop which emphasizes on semiconductor nanostructures, magnetic nanoparticles and catalysts. The workshop will cover fabrication of semiconductor nanostructures by ion implantation, sputtering, CVD and MBE in dielectric matrices on various surfaces and their applications to microelectronic, photonics and biotechnology; production of nano particles and thin films by sol-gel processing methods; processing and manipulation of nanostructures; electrical, magnetic, optical and chemical properties and device applications.

Europa Media Advanced Seminar Series, Sixth Framework Programme (FP6), EC PROJECT MANAGEMENT
Contract negotiations - project management - reporting - audits - typical mistakes
25-26 May, 2006, Hilton Budapest*****, Hungary
Early bird registration is available till 8 May, 2006.
SENSOR+TEST 2006 Conference, International Trade Fair for Sensorics, Measuring and Testing Technologies with concurrent Conferences
May 30- 1 June, 2006, Nurnberg, Germany
Missing High technologies, innovation policy and regional development”, First MINOS-EURONET  Strategy Forum on the impact of converging technologies, Bucharest, 18-19 May, 2006.
For details: www.minos-euro.net/forum/.
SPIE Photonics Europe,
3-7 April, 2006 Strasbourg , France
Conference on MEMS, MOEMS, AND MICROMACHINING II

SMS 2006- Spanish Molecular Electronics Symposium, 24 March, 2006, San Sebastian, Spain (Details...)

SMS 2006 will be organised by the following Institutions: PHANTOMS Foundation, Donostia International Physics Center (DIPC), CSIC and UPV-EHU, CIDETEC and in collaboration with the NANOTRON and Pico-Inside projects.

4th European Microelectronics and Packaging Symposiu
Satellite: Table-Top Exhibition and Workshop on Ferroelectric Thin- & Thick- films Processing and Their Applications in MEMS
May 22-24, 2006, Terme Catez, Slovenia
ASYNC 2006- 12th IEEE International Symposium on Asynchronous Circuits and Systems
March 13-15, 2006, Grenoble, France
nano tech 2006- International Nanotechnology Exhibition & Conference
February 21-23, 2006, Tokyo Big Sigh, Japan
4th ESA Workshop on Millimetre Wave Technology and Applications
The 8th Topical Symposium on Millimeter Waves -
TSMMW2006
The 7th MINT Millimeter-Wave International Symposium - MINT-MIS2006

February 15-17, 2006, Espoo, Finland
Training Seminar on “EC Project Management 2006: Contract negotiations - project management - reporting - audits - typical mistakes”
February 9-10, 2006, Budapest, Hungary
MEMS 2006 - 19th IEEE International Conference on Micro Electro Mechanical Systems
January 22-26, 2006, Lütfi Kirdar Convention and Exhibition Centre, Istanbul, Turkey
 DfMM Training Course “Thermal Issues in MEMS”
11-12 Jan 2006, Berlin, Germany
 
To continue our series of training courses, we are happy to announce that we are planning to hold another training session with the topic “Thermal Issues in MEMS” at the Fraunhofer IZM in Berlin, Germany in January 2006.
More details will be available on our website http://www.patent-dfmm.org/
Contact: George Bell, ISLI, UK, E-mail: george.bell@sli-institute.ac.uk
TOWARDS Molecular Electronics- 5th International Conference on Advanced Materials and Nanotechnology
12 - 17 December, 2005, Srem
DfMM Training Course “Modelling & Analysis of MEMS Packages”
12-14 Dec 2005, IEF, Paris, France
43rd IUVSTA Workshop on "Chemical Sensitivity in Scanning Probe Microscopy"
November 29 - December 03, Zakopane 2005
Course: Porous Silicon
November 21, 2005, Neuchâtel (CH), FSRM
ComPaMED 2005- 14th International Trade Fair Components, Parts and Raw Materials for Medical Manufacturing
November 16-18, 2005, Dusseldorf, Germany
Nanoscale technologies for biosciences. The ninth annual European conference on micro and nanoscale technologies for biosciences will take place in Montreux, Switzerland, from 15 to 17 November. The conference will feature presentations on current topics related to micro- and nanotechnologies in the biosciences. Major European Centres of Excellence and associated start-ups are invited to participate in order to present their activities. European Integrated projects and Networks of Excellence will also organize meetings during the conference. Programme here.
n&n2005. Nanoscience&Nanotechnology 2005 (‘’n&n2005’’) will take place at Villa Mondragone in Frascati, Italy, 14-16 November. ‘’n&n2005’’ is intended as an opportunity for concrete planning of future devices, based on innovative nanomaterials, involving both industrial entities and public research institutes, as well as for presentation by sponsoring firms of their instrumentation and success stories, based on current use by significant customers. n&n 2005

Erlangen Workshop on Microforming
November 14-15, 2005
Conference Office:
Dipl.-Ing. Stefan Geißdörfer,
Chair of Manufacturing Technology
Egerlandstr. 11, D-91058 Erlangen

Tel./Fax 0 91 31 / 85 2 79 54/0 91 31 / 93 01 42
eMail: s.geissdoerfer@lft.uni-erlangen.de
WWW:

Conference and EuropaBio Industry Hearing:"Tissue Engineering and Regenerative Medicine - Commercializing Future Life Saver"
November- 8 / 9 2005, Radisson SAS Brussels
CHEMNITZ'05 - Chemnitzer Fachtagung Mikrosystemtechnik - Mikromechanik & Mikroelektronik -
October 26 - 27, 2005, Chemnitz, Germany
THERMINIC's -11th International Workshop on Thermal Investigations of ICS and Systems
September 27 - 30, 2005, Belgirate, Lake Maggiore, Italy

THERMINIC Workshops are a series of events to discuss the essential thermal questions of microelectronic microstructures and electronic parts in general.
World Nano-Economic Congress 2005- WNEC
September 27-28, 2005, Suntec Singapore International Convention and Exhibition Center (Singapore).
NanoBio-Europe;
September 22 - 24, 2005; Munster
A merger of the NanoBioTec - Congress and Exhibition (Münster 2000-2003) and the NanoBiotechnologies X-France (Grenoble 2000-2003). NanoBio Europe present a new kind of annual international conference on Nanobiotechnology in Europe, the “NanoBio-Europe”.
The major focus of the NanoBio-Europe Congress is set on medical applications of nanobio technology. Key Aspects / Focus: I Molecular Targets; II Analytical and Diagnostic Techniques; III Therapeutic Approaches; V Environmental Aspects
MIDEM 2005, 41th International Conference on Microelectronics, Devices and Materials with the Workshop on Green Electronics
September 14 - September 16, 2005
Ribno at Bled, SLOVENIA
Nanofair 2005
September 13 - 15, 2005, St.Gallen, Switzerland
Optical System Design 2005
September 12 - 16, 2005, University Jena, Germany
ESSDERC-ESSCIRC 2005
September 12 - 16, 2005, Alpexpo, Grenoble, France
IMAPS Nordic Annual Conference
September 11 - 14, 2005, Quality Hotel, Tonsberg, Norway
SEMINANO2005, First International Workshop on Semiconductor Nanocrystals
September 10-12, 2005 Budapest, Hungary
Deadline for abstract submission: March 21, 2005
.
"EuroNanoForum 2005: Nanotechnology and the health of the EU Citizen in 2020",
September 6-9, 2005, EICC, Edinburgh, Scotland.
European Technology Platform on NanoMedicine launched
A Vision Paper on NanoMedicine, the European platform project, has been presented at the EuroNanoForum 2005 Conference in Edinburgh. The document establishes five main policy objectives: establish a clear strategic vision in the area resulting in a Strategic Research Agenda; decrease fragmentation in nano-medical research; mobilise additional public and private investment; identify priority areas; boost innovation in nanobiotechnologies for medical use. Three key priorities have also been confirmed: nanotechnology-based diagnostics including imaging; targeted drug delivery and release; regenerative medicine. The CEOs of Philips Medical Systems (Dr. Karvinen) and of Siemens Medical Solutions (Prof.Reinhardt) are prepared to take over the chairmanship of this platform together. As of the official start of the NanoMedicine Platform in September 2005, participation of a wider group of stakeholders is planned. It is envisaged to create working groups within the Platform that will establish the Strategic Research Agenda.
Source: Cordis - The Vision Paper (pdf)
Nanotechnology in BioDiagnostics and Analytics (NBDA) Conference
The Museum of Grenoble, Grenoble, France, 29th and 30th June 2005
Find out more here. Register online here.
Open call "Networks and Confidence Building" (Austrian NANO Initiative), 12 March 2005 - 07 November 2005. [Details] (April18, 2005)
European Commission, 2005. I2010 – A European Information Society for Growth and Employment.
Call for proposals for Marie Curie Research Training Networks
Publication date: 17 June 2005;
Closing Date(s): 28 September 2005 at 17.00 (Brussels local time)
Budget: € 220 million
Communication from the Commission, Building the ERA of knowledge for growth [Details]
Status report. Development of technology platform. [Details] (April15, 2005)
Healthy Aims "Implantable micro-sensors and micro-systems for ambulatory measurement and control in medical products"; IST-2002-1-001837, IP.
Open Call 3 - closes September 15th (see below)
Call for Subcontract:
Roadmap for Implanted Medical Devices;
Call Open July 27th 2005
Tenders to be submitted by 15th September 2005
Email Tender to: Mr Rob Turner, Healthy Aims Knowledge Management Workpackage Leader nexus@cea.fr; Website: http://www.healthyaims.org/
   
=============================================Designed for 1024x768 Resolution===============================================